Remove/install pressure transducer for wastegate aneroid capsule

AR09.40-S-1005PD

28.08.2019

Model	470, 471 with engine 699
	except code MT2 (Emissions class Euro 6d-TEMP N1 GR.III/N2)

Shown on model 470 with engine 699.301

1	Pressure transducer
2	Electrical connector
5	Bolts
7	Vacuum hoses
9	Vacuum hoses (model 470, 471 with engine 699.301)

S09.40-A000-12

 	Remove/install
1	Remove engine cover.		AR01.10-S-2405PD
2	Remove air filter housing.		AR09.10-S-1150PD
3	Remove air intake hose.		AR09.10-S-8030PD
4	Remove the fan.		AR20.40-S-5614PD
5	Disconnect electrical connection (2).
6	Remove vacuum hoses (7).	 Removal: Mark assignment of vacuum hoses (7).
		 Installation: Ensure correct assignment of vacuum hoses (7).
		 Installation: Check vacuum hoses (7).
		If necessary,
		
		Replace vacuum hoses (7).
7	Remove vacuum hoses (9).	Model 470, 471 with engine 699.301 except code MT2 (Emissions class Euro 6d-TEMP N1 GR.III/N2)
		 Installation: Check retaining clips for damage.
		If necessary,
		
		Replace damaged retaining clips.
8	Remove pressure transducer (1).	 To do this, remove the screw/bolts (5).
		 M6	*BA00.10-N-1002-01A
9	Install in the reverse order.

 Headless screws/bolts: screws/bolts and nuts, coarse-pitch thread

 Headless screws/bolts: screws/bolts and nuts, coarse-pitch thread