1 | Air intake hose |
2 | Turbocharger |
3 | Clip |
4 | Compressor air intake pipe |
5 | Clip |
W09.10-1059-12
Warning | Risk of injury caused by body parts being pinched or crushed as cab is tilted | Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure with the safety strut. | |
Topical note | Notes and information for working on air intake, charging | ||
| Remove/install | ||
1 | Tilt cab | ||
2 | Remove right soundproofing on frame | ||
3 | Remove air filter with carriers | ||
Clamp, air intake hose to air filter | |||
Clamp, boot to air intake pipe/air filter | |||
Bolt/nut, carrier for air filter to holder | |||
Bolt/nut, carrier for air intake pipe to holder | |||
4 | Slacken clamp (5) on compressor air intake pipe (4) | Clamp, air intake hose to air intake pipe compressor | |
5 | Slacken clamp (3) on air intake hose (1) | Clamp, air intake hose to turbocharger | |
6 | Release air intake hose (1) from compressor air intake pipe (4) | | |
7 | Release air intake hose (1) from exhaust gas turbocharger (2) and remove | Seal opening of exhaust gas turbocharger (2). | |
| Check | ||
8 | Check air intake hose (1) for damage | If damaged. | |
| |||
Install new air intake hose (1). | |||
9 | Check clamps (3, 5) for damage | If damaged. | |
| |||
Install new corresponding clamp (3, 5). | |||
10 | Install in the reverse order |