AR09.10-W-1150B | Remove/install air filter housing | 19.1.06 |
MODEL 940, 942, 943, 944 with CODE (M97) Front air intake
W09.10-1021-05
1 Charge air pipe
2 Corrugated hose
3 Connector
4 Connector
5 Nuts
6 Air filter housing
B7 Air monitor sensor
B132 Moisture/temperature sensor
| Remove/install | ||
Danger! | Risk of injury caused by being caught or pinched as cab is tilted | Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure with the safety strut. | |
1 | Tilt cab | ||
| Notes on tilting the cab | ||
2 | Unplug connector (3) at air monitor sensor (B7) | ||
3 | Unplug connector (4) at moisture/temperature sensor (B132) | ||
4 | Remove charge air pipe (1) from air filter to turbocharger | ||
5 | Remove air filter element | ||
6 | Remove nuts from air filter housing (6) at front behind bumper | ||
7 | Remove corrugated hose (2) from air intake pipe on air filter housing (6) | ||
8 | Remove nuts (5) from air filter housing (6) at top and remove air filter housing (6) | Installation: Replace self-locking nuts. | |
9 | Install in the reverse order |