AR09.10-W-1150A | Remove/install air filter housing | 19.9.06 |
ENGINE 902.9 in MODEL 957 with CODE (MS8) Natural gas engine
ENGINE 906.9 in MODEL 957
1 Corrugated hose
2 Bolts
3 Nuts
4 Air filter housing
5 Electrical connector
B7 Air filter monitoring sensor/switch
W09.10-0004-03
| Remove/install | ||
1 | Detach corrugated hose (1) from air intake pipe on air filter housing (4) | ||
2 | Disconnect electrical connector (5) on air filter monitoring sensor/switch (B7) | ||
3 | Remove bolts (2) and nuts (3) to the mounting clamps | Carefully open mounting clamps. | |
| Notes on self-locking nuts and bolts | ||
4 | Remove air filter housing (4). | In the case of bodies with cramped space available, the upper intake manifold must taken off. Turn air filter housing (4) through 90°. The lower suction opening must point to the rear. Remove air filter housing (4) upwards. | |
5 | Install in the reverse order |