ar0910p8130oli

Remove/install engine intake air duct downstream of air filter

ประเภท ar · หัวข้อ 09.10 · เวอร์ชัน 0203 · 2020-07-17

ใช้กับ: Engine 654 in model 205, 253 Engine 656 in model 253

ไม่มีใน “th” แสดงเป็น อังกฤษ

ตำแหน่ง

กลุ่มฟังก์ชัน 1 Engine › 09 Air intake, turbocharging › 09.10 Air cleaner — ซีรีส์ 205 · ซีรีส์ 253 · ซีรีส์ 654 · ซีรีส์ 656

EinPAS 15 Engine › 15.30 Air intake/charging › 15.30.33 Intake manifold/charge air pipe — ซีรีส์ 205 · ซีรีส์ 253 · ซีรีส์ 654 · ซีรีส์ 656

AR09.10-P-8130OLI

Remove/install engine intake air duct downstream of air filter

30.06.2020

Engine

654 in model 205, 253

Engine

656 in model 253

Remove/install engine intake air duct downstream of air filter

P09.10-A059-09

Shown on engine 654 in model 205

1

Engine air intake duct downstream of air filter

3

Clamps

5

Quick-release fastener

2

Engine cover

4

Electrical connector

6

Air filter housing

Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Remove/install

1

Remove engine cover (2).

Engine 656 in model 253

AP01.10-P-2405-01L

Engine 654 in model 205, 253

AR01.10-P-2405OLI

2

Remove cover over the air filter housing.

Engine 654 in model 205, 253

Installation: The guide lug must engage in the guide of the air filter housing (6).

3

Release and disconnect electrical connector (4).

4

Open clamps (3) and remove engine air intake duct downstream of air filter (1) from air filter housing (6).


Horizontally detach engine air intake duct downstream of air filter (1) from air filter housing (6).
Otherwise, the guide pin under the engine air intake duct downstream of the air filter (1) will be damaged.

Installation: Replace seal on air filter housing (6).

5

Press quick-release fastener (5) up to end stop (arrow) and remove engine air intake duct downstream of air filter (1).

Installation:
After installing the engine air intake duct downstream of the air filter (1), slide quick-release fastener (5) back to the closed position and check locking by means of the lock position.
If the connection is not completely locked, reposition the engine air intake duct downstream of the air filter (1).

6

Install in the reverse order.

เอกสารที่อ้างถึง