Remove/install engine intake air duct downstream of air filter

AR09.10-P-8130OLC

Remove/install engine intake air duct downstream of air filter

30.06.2020

Engine

654 in model 213, 238, 257

1

Engine air intake duct downstream of air filter

3

Clamps

5

Quick-release fastener

2

Engine cover

4

Electrical connector

6

Air filter housing

 Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

 

Remove/install

1

Remove engine cover(2).

AR01.10-P-2405OLC

2

Release and disconnect electrical connector(4).

3

Open clamps (3) and remove engine air intake duct downstream of air filter (1) from air filter housing (6).


Horizontally pull off engine air intake duct downstream of air filter (1) from air filter housing(6).
Otherwise the guide pin under the engine air intake duct downstream of air filter (1) will be damaged.

 Installation: Replace seal on air filter housing(6).

4

Press quick-release fastener(5) up to end stop (arrow) and remove engine air intake duct downstream of air filter (1).

 Installation:
After installing the engine air intake duct downstream of the air filter (1), slide quick-release fastener (5) back to the closed position and check locking by means of the lock position.
If the connection is not completely locked, reposition the engine air intake duct downstream of the air filter (1).

5

Install in the reverse order.