Shown on engine 642.9 |
1 | Air cleaner housing |
4 | Screw |
5 | Screw |
6 | Guides |
P09.10-2132-06
Warning | Risk of injury due to fan starting unexpectedly | Do not reach into the rotation or hazard area of the fan. Wear closed and close-fitting work clothes. | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
| Remove/install | ||
1 | Remove partition wall between wheel wells | ||
2 | Remove engine cover | ||
3 | Remove engine air intake duct upstream of right air filter | ||
4 | Remove engine air intake duct downstream of air filters | ||
5 | Unscrew bolts (4, 5) | Bolt, air filter housing to bracket | |
6 | Remove air filter housing (1) | First pull air filter housing (1) inwards, then forwards. | |
Installation: Wet guides (6) with lubricant. | |||
Lubricant, rubber assembly 1 l | |||
7 | Remove air filter element | On replacing air filter housing (1) and air filter insert. | |
| Engine 642.8 in model 251 | ||
| Engine 642.9 in model 251 | ||
Installation: On replacing one air filter housing (1) and air filter insert, also replace opposite air filter insert. | |||
8 | Install in the reverse order | ||
9 | Reset quantity mean value adaptation data using diagnostic system | On replacing air filter housing (1) and air filter insert. | |
| |||
In the menu "Control unit adaptations" select the menu item "Quantity mean value adaptation data" and process. |