Remove/install air filter housing

AR09.10-P-1150MSC

Remove/install air filter housing

09.11.2018

Engine

256.9 in model 167

1

Air cleaner housing

6

Screw

2

Air intake pipe

7

Lock clips

4

Electrical connector

8

Wiring harness mount

5

Wiring harness mount

N3/10

ME-SFI [ME] control unit

 Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

 

Remove/install

1

 Remove ME-SFI [ME] control unit (N3/10) from air filter housing (1) and place to one side with connected lines.

AR07.08-P-1000MSC

2

Remove air intake pipe (2).

3

Open locking clips (7).

4

Release and disconnect electrical connector (4).

5

Unclip wiring harness bracket (8) at the air filter housing (1).

 Mounting wedge

*110589035900

6

Unclip bracket of wiring harness (5).

 Mounting wedge

*110589035900

7

Remove screw (6).

 Screw, air filter housing to charge air distributor

*BA09.10-P-1001-01MRT

8

Remove air filter housing (1).

 Installation: Wet elastomer bearings with lubricant.

Lubricant, rubber assembly 1 l

*BR00.45-Z-1010-06A

9

Remove pressure sensor downstream of air filter (B28/11).

When installing new air filter housing (1).

AR07.04-P-0110MSC



Check

10

Check elastomer bearings for wear and damage and replace if necessary.

11

Install in the reverse order.

 Air cleaner housing

Number

Designation

Engine 256.9

BA09.10-P-1001-01MRT

Screw, air filter housing to charge air distributor

Nm

8

Repair materials

Number

Designation

Order number

BR00.45-Z-1010-06A

Lubricant, rubber assembly 1 l

A 000 989 03 67