P09.10-2288-09
1 | Engine covers | 4 | Clamps | |
2 | Engine air intake ducts | 5 | Air filter housing | |
3 | Electrical connections |
Danger ! | Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | |
| Remove/install | ||
1 | Remove engine covers (1) | ||
2 | Remove engine air intake ducts (2) | ||
3 | Disconnect electrical connections (3) at the pressure sensors downstream of air filter | ||
4 | Loosen clamps (4) at charge air lines | ||
5 | Remove air filter housing (5) upwards | ||
6 | Install in the reverse order |