AR09.10-P-1050A | Removing and installing air cleaner | 9.6.97 |
ENGINE 611.960 in MODEL 202.133 /134 /193 /194
ENGINE 611.961 up to 30.6.99 in MODEL 210.006 /007 /206 /606
P09.10-0299-06
Model 202:
4 Air cleaner
4/2 Air intake hose
4/3 Intake air cowl
5 Rubber grommets
B2/5 Hot film mass air flow sensor
P09.10-2003-06
Model 210 (up to 06.99):
4 Air cleaner
4/2 Air intake hose
4/3 Intake air cowl
5 Rubber grommets
B2/5 Hot film mass air flow sensor
| Removing, installing | ||
1.1 | Release coolant return flow hose at air cleaner | Model 202 | |
2.1 | Detach charge pressure regulator vacuum transducer (Y31/5) at air cleaner | Model 210 | |
3 | Unplug electrical connections at hot film mass air flow sensor (B2/5) | ||
4 | Remove air intake hose (4/2) at air cleaner | Inspect condition of hose clips and hoses, replace if necessary. | |
| |||
| |||
5 | Remove intake air cowl (4/3) | ||
6 | Remove air cleaner (4) | Installation: when installing, insert securing studs of the air cleaner housing into the rubber grommets (5) of the wheelhousing liner. | |
7 | Install in the reverse order |
Commercially available tools