S07.52-1009-06
1 Plug connection
R22 Heated O2 sensor,
Modification notes
24.10.03 | Risk of death.Death may result if vehicle slips or topples from the lifting platform, notes on safety included for the first time. | ||
24.10.03 | Risk of injury to skin and eyes from handling hot or glowing objects, notes on safety included for the first time | ||
24.10.03 | Risk of explosion caused by explosive gas. Risk of poisoning and causticization from swallowing battery acid, notes on safety included for the first time |
| Remove/Install | ||
Danger! | Risk of injury to skin and eyes from handling hot or glowing objects. | Wear safety gloves, protective clothing and safety glasses, if necessary. | |
Danger! | Risk of explosion caused by explosive gas. Risk of poisoning and caustic burns caused by swallowing battery electrolyte. Risk of injury caused by burns to skin and eyes from battery acid or when handling damaged lead-acid batteries | No fire, sparks, open flames or smoking. Wear protective gloves, acid-resistant clothing and safety glasses. Pour battery electrolyte only into suitable and appropriately marked containers. | |
1 | Disconnect ground cable from battery | See | |
Remove/install battery | |||
| Notes on battery | ||
2 | Unclip catch (arrow) and disconnect connector (1) of heated O2sensor (R22) | ||
Danger! | Risk of death cased by vehicle slipping or toppling off of the lifting platform. | Align vehicle between the columns of the hydraulic hoist and position the four support plates below the hoist support points specified by the vehicle manufacturer. | |
3 | Raise vehicle with lifting platform | ||
4 | Unscrew heated O2sensor (R22) | Apply heat-resistant lubricant to thread of heated O2sensor. | |
Box wrench bit, Delco R4 and A6 | |||
| |||
5 | Check lambda control | Refer to ENGINE DM | |
6 | Install in the reverse order | ||
7 | Read out fault memory of PEC control unit, erase if required | Refer to ENGINE DM |
O2 sensor
000 589 71 03 00
Ring wrench socket
Repair materials
Number | Designation | Order number |
BR00.45-Z-1005-06A | Paste, hot lubrication 1 kg, DB supply specification 6879.20 | A 000 989 76 51 |