AR07.51-S-1400B | Removing, installing throttle valve control unit | 17.11.98 |
ENGINE 111.950 in MODEL 638.094 /194 /294 with CODE (MR7) Engine M111 E20 (95 kW) Euro III
ENGINE 111.980 in MODEL 638.094 /194 /294 with CODE (MR8) Engine M111 E20 (105 kW) Euro III
S07.51-2546-06
1 Screw clip
2 Air hose
3 Connector
4 Clip
5 Bolt
6 Intake manifold
7 Intermediate flange
8 Bolt
9 Bracket
10 Electric cable
11 Hose
M33 Throttle valve control unit
| Removing, installing | ||
1 | Disconnect ground cable at battery | ||
2 | Unplug connector (3) of throttle valve control unit (M33) | Installation: pay attention to routing of electric cable (10) | |
3 | Detach hose (11) of purge control valve at throttle valve control (M33) | ||
4 | Take off screw clip (1) at air hose (2) and detach air hose (2) | ||
5 | Unscrew bolt (8) of throttle valve control unit (M33) | | |
Inspect intermediate flange (7), replace if necessary. | |||
Replacing intermediate flange at intake manifold | |||
| |||
6 | Install in the reverse order |
HFM-SFI fuel injection and ignition system
Number | Designation | Engine 111.950/ | |
BA07.51-N-1001-01B | Bolt of throttle valve control unit to intermediate flange | Nm | 9 |
Intake manifold, intake manifold preheater