Install test/measuring equipment in the low-pressure fuel circuit

ประเภท ar · หัวข้อ 07.15 · เวอร์ชัน 0107 · 2011-01-20

ใช้กับ: ENGINE 900.91 /92, 902.91 /93, 904.94 /95 /96 /97, 906.93 /94 /95 /96 /98 /99, 924.91 /93, 926.91 /92 /93 /95 /97 in MODEL 000.001 Messung der Kraftstoffrücklaufmenge am Motor'

ไม่มีใน “th” แสดงเป็น อังกฤษ

AR07.15-G-2000-01DC

 Diesel injection system with unit pumps (MR/PLD)

Number	Designation		Engines 900.9, 902.9, 904.9, 906.9	Engine 924.9, 926.9


BA07.15-N-1007-01D	Banjo bolt, fuel line to overflow valve	Nm	50	50

Install test/measuring equipment in the low-pressure fuel circuit

Adapter parts

541 589 00 91 00

G07.15-3140-06

1 Remove engine trim panel (1).

2 Separate fuel return flow line (2) at overflow valve (3).

 Counter-hold overflow valve (3) when detaching fuel return flow line (2).

3 Close fuel return line (2) with
adaptation piece of banjo bolt (4) and locking nut (6).

4   Install adapter assembly component banjo union (5) on overflow valve (3).

 Counterhold overflow valve (3) when tightening.

5 Install transparent fuel line (7) at  adaptation piece of banjo union (5) and guide into a clean vessel (8).

6 Remove fuel return line (12) at fuel filter housing (13).

7 Install transparent fuel line (10) with  adaptation piece (11) at fuel filter housing (13).

 The adaptation piece (11) with opening clamp (arrow) must press on the check valve.

8 Guide transparent fuel line (10) into a clean vessel (9).