ar0712t830002b

Set start of delivery at drive gear

ประเภท ar · หัวข้อ 07.12 · เวอร์ชัน 0101 · 2005-07-12

ใช้กับ: ENGINE 441.980 in MODEL 613.355 /364 /365 ENGINE 402.970, 446.938 in MODEL 613.455 /485

ไม่มีใน “th” แสดงเป็น อังกฤษ

ตำแหน่ง

กลุ่มฟังก์ชัน 1 Engine › 07 Mixture formation › 07.12 Diesel injection system, inline injection pump and electronic control (EVE, EDC) — ซีรีส์ 441 (รุ่น 980) · ซีรีส์ 613 (รุ่น 355, 364, 365, 455, 485)

EinPAS 15 Engine › 15.45 Engine management › 15.45.51 Injection pump/injection timer — ซีรีส์ 441 (รุ่น 980) · ซีรีส์ 613 (รุ่น 355, 364, 365, 455, 485)

ใช้กับเครื่องยนต์/เกียร์ด้วย: 402 970, 446 938

AR07.12-T-8300-02B

Set start of delivery at drive gear

Injection pump, unit pump, high pressure pump

Number

Designation

Engine
402.970

Enginey
441.980,
446.938

BA07.02-N-1001-01A

Bolt of drive gear to injection pump

Nm

35

35

Set start of delivery at drive gear

Cranking device

407 589 00 63 00

Set start of delivery at drive gear

T07.12-0012-11

Adjusting

1 Slacken top hexagon bolts at drive gear.

2 Crank engine with cranking device 360° and slacken the remaining hexagon bolts.

3 Continue cranking engine with cranking device until the specified start of delivery marking on the flywheel is aligned with the edge in the inspection hole.

Set start of delivery at drive gear

T07.12-0010-11

4 Rotate camshaft of injection pump at the hexagon nut.

Set start of delivery at drive gear

T07.12-0011-11

5 Continue rotating camshaft of injection pump until the markings (chisel punches) on injection pump and on drive flange are aligned.

The setting range is about 8° crankshaft angle.

Set start of delivery at drive gear

T07.12-0007-01

6 Tighten hexagon bolts at drive gear .

Crank engine with cranking device for this step.