601 589 00 08 00
601 589 05 21 00
Blocking screw
Serrated wrench
D07.13-0031-01
1 Replace seal of injection pump flange and oil.
2 Check position of engine (15° after ignition TDC of cylinder 1); adjust to correct setting if necessary.
D07.13-0032-01
3 Unscrew plug from injection pump.
D07.13-0033-01
4 Fit flange onto the injection pump shaft and turn until the cam of the pulse generator is visible in the hole.
After the installing the inline injection pump, remove the blocking screw.
D07.13-0034-01
5 Insert blocking screw.