Distributor injection pump
Number | Designation | Engine 602.980 | Engine 602.984/ | ||
BA07.13-N-1006-01A | Bolt of tensioning claw of nozzle holder to cylinder head | 1st stage | Nm | 7 | 7 |
2nd stage | ° | 180 | 180 | ||
D07.11-0051-01
Removing
1 Slacken tensioning claws (6) and take off together with clamp (5), spherical washer (4) and bolt (3).
D07.11-0052-01
Installing
2 Replace seal (7), clamp (5), spherical washer (4) and bolt (3).
D07.11-0051-01
3 Insert tensioning claws (6) with new spherical washer (4), new clamp (5) and new bolt (3); tighten to initial torque and tighten fully to tightening angle. .
Bolts (3) must not be retightened.