1 | Vacuum hose |
2 | Vacuum reservoir |
3 | Vacuum hose |
4 | Screw/bolt |
S07.09-0001-11
| Remove/install | ||
1 | Remove engine cover | ||
2 | Remove vacuum hose (1) at vacuum reservoir (2) | Installation: Check vacuum hose (2) for damage; replace if necessary. | |
3 | Remove vacuum hoses (3) from the connections | Installation: Check vacuum hoses (3) for damage; replace if necessary. Wet vacuum hoses (3) with lubricant. | |
Lubricant, rubber assembly 1 l | |||
4 | Remove screw/bolts (4) | M6 | |
Bolt, vacuum reservoir to bracket | |||
5 | Remove vacuum reservoir (2) | ||
6 | Install in the reverse order | ||
| Check | ||
Danger ! | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
7 | Check for leaktightness with engine running | Visual inspection only. |