1 | Hot film mass air flow sensor |
2 | Screw/bolts |
3 | Air filter housing |
4 | Electrical connection |
S07.07-4518-11
| Notes on avoiding damage through contamination and foreign objects | ||
| Remove/install | ||
1 | Disconnect electrical connection (4) | ||
2 | Remove screw/bolts (2) from air filter housing (3) | Screw/bolt, hot film mass air flow sensor to air filter housing | |
3 | Remove hot film mass air flow sensor (1) | Installation: Check seal. | |
Depending on findings | |||
| |||
Replace seal. | |||
4 | Install in the reverse order | ||
| Check | ||
Danger ! | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
5 | Check for leaktightness with engine running | Visual inspection only. |