Remove/install needle movement sensor of injection nozzle

AR07.04-T-0003A

Remove/install needle movement sensor of injection nozzle

3.11.09



Remove/install

1

Open engine compartment flap and maintenance flap at the rear left

2

Open connecting cable connector

 Protect needle movement sensor connector against damage and contamination

 To do this press metal clamp in the direction of the arrow (1) and detach the connector (2)

3

Remove injection nozzle with claw wrench

 During remove/install ensure that the connecting cable is not twisted off or damaged

 To do this lead the cable connector through the claw wrench and lay the connecting cable in the slot



*BA07.03-N-1002-01A



*442589000700

4

Install in the reverse order

Number

Designation

Engine 447

Engine 489

BA07.03-N-1002-01A

Thrust bolt, injection nozzle to cylinder head

Nm

70

70