AR07.04-P-0070TB | Remove/install temperature sensor | 9.3.10 |
ENGINE 646.951 in MODEL 211.004 with CODE (474) Particulate filter
Temperaturfühler nach Kat (im Partikelfilter)
ENGINE 646.961 in MODEL 211.006 /206 /606 with CODE (474) Particulate filter
Temperaturfühler nach Kat (im Partikelfilter)
ENGINE 646.8 in MODEL 211 with CODE (474) Particulate filter
Temperaturfühler nach Kat (im Partikelfilter)
P07.04-2187-06
Shown on engine 646.9
1 Electrical connector
2 Cable holder
B19/8 Temperature sensor downstream of TWC
| Remove/install | ||
Danger! | Risk of injury to skin and eyes caused by handling hot or glowing objects. | Wear safety gloves, protective clothing and safety glasses, if necessary. | |
Danger! | Risk of death caused by vehicle slipping or toppling off the lifting platform. | Align vehicle between columns of lifting platform and position four support plates at lifting platform support points specified by vehicle manufacturer. | |
1 | Raise vehicle with lifting platform | ||
2 | Remove bottom section of soundproofing | ||
3 | Disconnect electrical connector (1) of temperature sensor downstream of TWC(B19/8) | ||
4 | Unclip cable from cable bracket (2). | ||
5 | Remove temperature sensor downstream of TWC(B19/8) | Installation: Coat thread of temperature sensor downstream of TWC(B19/8) with heat-resistant lubricant. | |
| |||
Polyamide | |||
6 | Install in the reverse order | ||
7 | Read fault memory, erase if necessary | Stored faults which may be caused by assembly work, test work, removed lines or a simulation, must be processed and erased in the fault memories after completing the work. | |
| Connect STAR DIAGNOSIS and read out fault memory | ||
STAR DIAGNOSIS diagnosis system | |||
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running | Secure vehicle to prevent it from moving by itself. | |
8 | Carry out an engine test run and test exhaust system for leaks |
Sensors
Number | Designation | Engine | Engine | ||
BA07.04-P-1002-01G | Temperature sensor to diesel particulate filter | Nm | 40 | 45 | |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1005-06A | Paste, hot lubrication 1 kg, DB supply specification 6879.20 | A 000 989 76 51 |