AR07.03-W-6833J | Clean nozzle holder combination | 23.11.10 |
ENGINES 900.9 in MODELS 375.1, 970, 972, 975, 976
ENGINES 902.9 in MODEL 375.3, 950.5 /6, 952.5 /6, 953.6, 954.5
ENGINES 902.9 in MODEL 957 except CODE (MS8) Natural gas engine
ENGINES 902.9 in MODELS 375.1, 970, 972, 974, 975, 976
ENGINES 924.9 in MODELS 958.0, 970, 972, 974, 975, 976
ENGINES 925.9 in MODELS 970, 972, 974
ENGINES 926.9 in MODEL 958.0
ENGINES 926.9 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5, 957, 958.2
W07.03-1011-02
1 Nozzle holder combination
2 High-performance ultrasound cleaning equipment
3 Perforated cover
| Removing | ||
1 | Remove nozzle holder combination (1) | ||
| Clean | ||
2 | Fill high-performance ultrasound cleaning equipment (2) with cleaning fluid and heat up to 60°C | Mix cleaner with water in the ratio 1:2 and pour in up to the marking. Filling capacity about 1.5 l. | |
3 | Insert perforated cover (3) into the high-performance ultrasound cleaning equipment (2), place nozzle holder combinations (1) vertically into the perforated cover (3) and clean | ||
4 | Switch on high-performance ultrasound cleaning equipment (2) | Pay attention to safety information from the manufacturer. | |
| Install | ||
5 | Install nozzle holder combinations (1) | Install nozzle holder combination (1) at the latest 4 hours after cleaning since corrosion of the needle can lead to malfunction of the nozzle holder combination (1). | |
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running | Secure vehicle to prevent it from moving by itself. | |
6 | Start engine immediately after installing nozzle holder combination (1) and run |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1033-04A | Cleaner, P3 Neuproton 5032 | Bandelin electronic GmbH & Co. KG |