Test data of valve guides
Number | Designation | Engine 601.943 | Engine 602.980/ | ||
BE05.30-N-1003-02D | Valve guide inner (A) | Inlet | mm | 8.000–8.030 | 8.000–8.030 |
Exhaust | mm | 9.000–9.050 | 9.000–9.050 | ||
Fig. see | – | – | |||
601 589 02 23 00
Plug gage
Cylinder brush
000 589 10 68 00
D05.30-0077-01
1 Thoroughly clean bore of valve guide .
D05.30-0078-01
2 Insert "go-no go" gage (4) into the bore of the valve guide. If it is possible to fully insert the appropriate "no go" side (exhaust 9 mm, inlet 8 mm), replace valve guide.