Checking camshaft timing · ar0520t6015b · Mercedes-Benz WIS

AR05.20-T-6015B

Checking camshaft timing

15.5.00

ENGINE 441.980 in MODEL 613.355 /364 /365

ENGINE 402.970, 446.938 in MODEL 613.455 /485

T05.30-0011-11

1 Cylinder head cylinder 1

2  Dial gage holder

3  Dial gage

	Inspect
1	Take off valve covers of the first and the synchronized cylinder		*BA01.20-N-1001-01F
2	Fit on cranking device		*407589006300
3	Position first cylinder to ignition TDC	 There is no load on the rocker arms, the tappet rods can be easily turned, the synchronized cylinder is positioned at overlap TDC.
4	Eliminate the valve clearance of first cylinder	 Turn the adjusting bolt until the rocker arm has no play.
5	Crank engine a further revolution in direction of rotation	 The first cylinder is positioned at overlap TDC.
6	Mount dial gage with dial gage holder onto the cylinder head of the first cylinder	 Place the dial gage with a preload (max. 5 mm) onto the valve spring retainer of the inlet valve and set the scale to "0".
			*363589022100
			*001589532100
7	Crank back engine until the pointer of the dial gage stops
8	Read off measurement of valve lift at TDC inlet valve	Valve lift	*BE05.20-N-1002-02D
		Timing	*BE05.20-N-1001-02D
9	Re-set first cylinder to overlap TDC
10	Re-position dial gage	 Place the dial gage with a preload (max. 5 mm) onto the valve spring retainer of the exhaust valve and set the scale to "0".
			*363589022100
			*001589532100
11	Crank engine in direction of rotation until the pointer of the dial gage stops
12	Read off measurement of valve lift at TDC exhaust valve	Valve lift	*BE05.20-N-1002-02D
		Timing	*BE05.20-N-1001-02D
13	Set the valve clearance of first cylinder
			AP05.30-T-0560B
14	Fit on cylinder covers	  Use new gasket.	*BA01.20-N-1001-01F
15	Remove cranking device

Inspection data of timing

Number	Designation				Engine 402.970	Engines 441.980, 446.938


BE05.20-N-1001-02D	Timing at specified valve clearances and measurable with graduated disk only	Intake	opens before TDC	°CA	18,4	17
			closes after BDC	°CA	52,4	29
		Outlet	opens before BDC	°CA	46,8	71
			closes after TDC	°CA	12,8	13
BE05.20-N-1002-02D	Valve lift when valve setting is free of clearance	Intake	opens before TDC	mm	0.45...0.60	0.55...0.75
		Outlet	closes after TDC	mm	0.45...0.60	0.65...0.85

 Crankcase ventilation, cylinder head cover

Number	Designation		Engine 402.970	Engine 441.980	Engine 446.938


BA01.20-N-1001-01F	Bolt of cylinder head cover to cylinder head	NM	25	25	25

363 589 02 21 00

Cranking device

Dial gage holder

Dial gage

001 589 53 21 00

407 589 00 63 00

เอกสารที่อ้างถึง

ap0530t0560b