1 | Bolts |
2 | Heat shield |
3 | Chain tensioner |
4 | Sealing ring |
P05.10-2505-06
P05.10-2506-08
3 | Chain tensioner | 7 | Screw | |
5 | Rear bracket | 8 | Bracket | |
6 | Bolts |
Danger ! | Risk of injury to skin and eyes due to handling of engine oil. Risk of poisoning caused by swallowing engine oil | Wear protective gloves, protective clothing and safety glasses. | |
Danger ! | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
| Notes on avoiding damage through contamination and foreign objects | ||
| Remove/install | ||
1 | Remove air filter housing | ||
2 | Release and disconnect electrical connection on DPF differential pressure sensor | ||
3 | Remove screw/bolts (6) and place rear bracket (5) of the air filter housing with DPF differential pressure sensor to one side | M61 | |
4 | Remove screw/bolts (1) and take off heat shield (2). | M61 | |
5 | Remove screw/bolt (7) and press bracket (8) downwards | To allow access to chain tensioner (3). | |
Shield to starter | |||
6 | Remove chain tensioner (3) | Collect escaping engine oil with rags. | |
Chain tensioner in cylinder head | |||
7 | Replace sealing ring (4) of chain tensioner (3) | ||
8 | Install in the reverse order | ||
| Check | ||
Danger ! | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
9 | Perform an engine test run and check engine for leaktightness |