S05.30-4505-08
1 | Compensating element | 2 | Roller-type cam follower | 3 | Clamp |
| Remove/install | ||
1 | Remove cylinder head cover | ||
2 | Remove roller cam follower (2) together with the compensating element (1) | When removing several compensating elements (1) make sure that roller-type cam follower (2) with compensating elements (1), which were not replaced, are reinstalled at the previous fitting point. For this purpose, mark roller-type rocker arm (2) and compensating element (1) relative to each other. | |
Installation: Oil roller-type rocker arm (2) and compensating elements (1). | |||
3 | Disconnect compensating elements (1) for roller-type cam follower (2) | To do this remove clips (3). | |
4 | Install in the reverse order |