ประเภท ar · หัวข้อ 03.30 · เวอร์ชัน 0101 · 2019-09-06
ใช้กับ: Engine 900.9## ## up to 779067, 902.9## ## up to 779067, 904.9## ## up to 779067, 906.9## ## up to 779067, 924.9## ## up to 779067, 925.9## ## up to 779067, 926.9## ## up to 779067
900.9## ## up to 779067, 902.9## ## up to 779067, 904.9## ## up to 779067, 906.9## ## up to 779067, 924.9## ## up to 779067, 925.9## ## up to 779067, 926.9## ## up to 779067
900 589 00 15 00
Drift
1
Push back sleeve (2) on drift (1).
2
Slightly grease O-ring on punch (1).
3
Push guide bearing (3) onto drift (1) up to the end stop.
The groove (arrow) should point away from the punch (1).
W03.30-1074-04
4
Position drift (1) flush with the guide bearing (3) on the flywheel (4) and drive in guide bearing (3) up to end stop into the flywheel (4).
The installation depth for the guide bearing (3) is determined by the spacer ring (5) installed.
