AR03.20-W-4841J | Remove/install drive gear for oil pump on crankshaft | 23.11.10 |
ENGINES 900.9 in MODELS 375.1, 970, 972, 975, 976
ENGINES 902.9 in MODEL 375.3, 950.5 /6, 952.5 /6, 953.6, 954.5
ENGINES 902.9 in MODEL 957 except CODE (MS8) Natural gas engine
ENGINES 902.9 in MODELS 375.1, 970, 972, 974, 975, 976
ENGINES 924.9 in MODELS 958.0, 970, 972, 974, 975, 976
ENGINES 925.9 in MODELS 970, 972, 974
ENGINES 926.9 in MODEL 958.0
ENGINES 926.9 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5, 957, 958.2
W03.20-1133-06
1 Drive gear
2 Crankshaft
Arrow Groove
| Removing | ||
1 | Remove crankshaft (2) | ||
Danger! | Risk of injury to skin and eyes caused by handling hot or glowing objects. | Wear safety gloves, protective clothing and safety glasses, if necessary. | |
2 | Heat drive gear (1) with hot air gun and remove from the crankshaft (2) | ||
| Install | ||
Danger! | Risk of injury to skin and eyes caused by handling hot or glowing objects. | Wear safety gloves, protective clothing and safety glasses, if necessary. | |
3 | Heat drive gear (1) with hot air gun up to about 200°C and mount on the crankshaft (2) | Use temperature measuring device with a measuring range of -200°C to +1000°C. | |
4 | Install crankshaft (2) |