AR03.20-W-0002R | Additional testing during an engine repair on the crankshaft, on main bearing and connecting rod bearing | 28.1.09 |
ENGINE 926.9 in MODEL 949
| Checking | ||
1 | Remove oil filter element and check slats of oil filter element from outside for metal abrasion and swollen condition | Only if there is advanced wear or damage to engine components. | |
| Engine oil and filter change | ||
2 | Replace oil-water heat exchanger | Only if there is metal grit on the oil filter element lamella or in the engine oil circuit. | |
3 | Remove oil pump, disassemble and check for wear and damage by means of a visual inspection | Only remove if reinforced metal abrasion was found at oil filter element. | |
4 | Fill engine oil circuit | Only if engine was repaired due to damage to crankshaft. | |
5 | Replace engine oil and oil filter element | If metal abrasion or swollen condition of oil filter element (coolant in engine oil circuit). | |
| Engine oil and filter change |