S03.20-2001-09
1 Flywheel / driving disc
2 Radial retainer of the crankshaft
3.1 Insertion tool (series state)
3.2 Insertion tool (repair state)
3.3 Insertion tool (inner part)
| Removing | ||
1 | Remove the flywheel / driving disc (1) | ||
2 | With the aid of a screwdriver, push the crankshaft radial retainer (2) outwards. | Pay attention not to damage the crankshaft and the housing hole of the crankshaft radial retainer (2). Use a clean cloth as support. | |
| Assembly | ||
3 | Install the rear radial retainer (2) of the crankshaft. | If running impression is noticed, install a crankshaft radial retainer (2) in the repair position | |
| |||
4 | Install the flywheel/driving disc (1) | ||
5 | Complete the vehicle | Before installing the gearbox, check whether it is oiltight, impregnating the clean and dry surrounding area with contrast spray. | |
|
111 589 08 43 00
Assembly tool
Repair materials
Number | Designation | Order number |
BR00.45-Z-1001-03A | Crack detector | A 000 989 03 59 |