Inspection data of connecting rod
Number | Designation | Engine | |||
BE03.10-N-1006-01D | Conrod bush inner (d) | mm | 26.012...26.018 | ||
Fig. see | - | ||||
BE03.10-N-1007-01D | Conrod bush outer diameter | mm | 28.575...28.600 | ||
BE03.10-N-1008-01D | Conrod bush basic bore (d1) | mm | 28.500...28.521 | ||
Fig. see | - | ||||
BE03.10-N-1009-01D | Piston pin play in conrod bush | mm | 0.007...0.018 | ||
BE03.10-N-1010-01D | Peak-to-valley height (Rz) of conrod bush on inside | μm | 5 | ||
Inspection data of connecting rod
Number | Designation | Engines | |||
BE03.10-N-1006-01D | Conrod bush inner (d) | mm | 28.018...28.024 | ||
Fig. see | - | ||||
BE03.10-N-1007-01D | Conrod bush outer diameter | mm | 30.575...30.600 | ||
BE03.10-N-1008-01D | Conrod bush basic bore (d1) | mm | 30.500...30.525 | ||
Fig. see | - | ||||
BE03.10-N-1009-01D | Piston pin play in conrod bush | mm | 0.007...0.018 | ||
BE03.10-N-1010-01D | Peak-to-valley height (Rz) of conrod bush on inside | μm | 5 | ||
D03.10-0004-01
1 Press out conrod bush, press out old conrod bush with new one.
Press in new conrod bush so that the oil drillings in the conrod bush are aligned with the oil drillings in the conrod (arrows).
(Arrow) oil hole engine 601.943
D03.10-0005-01
2 Turn diameter of conrod bush, ream.
3 Dress side surfaces of conrod on a dressing plate.
(Arrow) oil holes engines 602.980/982/983/984/985