1 | Oil pan bottom section |
2 | Bolts |
3 | Oil pan |
S01.45-4548-05
Caution | Risk of injury to skin and eyes due to handling of engine oil. Risk of poisoning caused by swallowing engine oil | Wear protective gloves, protective clothing and safety glasses. | |
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
Topical note | Notes on self-locking nuts and bolts | ||
| Remove/install | ||
1 | Remove lower engine compartment paneling | ||
Installation: Only install engine compartment paneling after leak check has been performed. | |||
2 | Drain engine oil. | ||
| |||
Collect engine oil with a suitable container. | |||
3 | Remove screws (2) of the oil pan bottom section (1). | ||
Installation: Observe tightening procedure of screws/bolts (2). | |||
Bolt, oil pan bottom section to oil pan | |||
4 | Remove oil pan bottom section (1). | ||
Notes on application of flange sealants to seal major assemblies | |||
Notes on sealant path for oil pan | |||
| |||
Installation: Apply sealant. | |||
Sealant, Loctite 5970, 50 ml | |||
Application gun | |||
Blade | |||
| Clean | ||
5 | Clean sealing surface an oil pan (3) and oil pan bottom section (1). | ||
Loctite 7200 | |||
Loctite 7063 (400 ml) cleaning spray | |||
6 | Install in the reverse order. | ||
| Check | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
7 | Check for leaktightness when engine is running. | Visual inspection only. |
122 589 00 28 00
Blade
112 589 00 25 00
Application gun