541 589 01 33 00
Removal and insertion device
Supplementary set
457 589 00 33 00
W01.40-0011-01
1 Screw screw bolts (1) into two diagonal opposite threaded holes in the crankcase.
Use both screw bolts (1) and the pull out plate from the supplementary set.
W01.40-0010-01
2 Attach pull out plate (2) to the extractor.
3 Lead pull out plate (2) into the cylinder liner (3).
The guide collar of the pull out plate (2) must sit in the cylinder liner (3); do not place extractor under stress.
4 Fit countersupport (5) over the spindle onto the screw bolt (1) and screw tight.
5 Remove cylinder liner (3) by turning the nut (6).
6 Remove extractor.