1 | Electrical connector |
2 | Screw |
3 | Wiring harness |
4 | Electrical connector |
5 | Electrical connector |
S01.40-4525-03
6 | Screw |
7 | Screw |
8 | Screw |
9 | Screw |
10 | Screw |
11 | Screw |
12 | Screw |
13 | Screw |
14 | Cover |
S01.40-4526-06
S01.40-4527-08
14 | Cover | 16 | Sealing ring | |
15 | Sealing rings | 17 | Timing case cover |
Caution | Risk of injury to skin and eyes due to handling of engine oil. Risk of poisoning caused by swallowing engine oil | Wear protective gloves, protective clothing and safety glasses. | |
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
| Remove/install | ||
1 | Disconnect electrical connection (1) | ||
2 | Remove screw/bolt (2) | M6 | |
3 | Place wiring harness (3) outside of working area | ||
4 | Disconnect electrical connection (4) | ||
5 | Disconnect electrical connection (5) | ||
6 | Remove cap (14) | | |
To do so, unscrew screws/bolts (6, 7, 8, 9, 10, 11, 12, 13). | |||
Installation: Apply sealant to sealing surface of cap (14). | |||
Sealant, Loctite 5970, 50 ml | |||
Bolt, front cover to timing case cover | |||
Mounting wedge | |||
Blade | |||
7 | Remove sealing rings (15) | Installation: Replace sealing rings (15). | |
8 | Remove sealing ring (16) | Installation: Install new sealing ring (16). | |
| Clean | ||
9 | Clean sealing surfaces of timing case cover (17) and cap (14) | ||
Loctite 7063 (400 ml) cleaning spray | |||
Loctite 7200 | |||
10 | Install in the reverse order | ||
| Check | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
11 | Check for leak tightness with engine running | Visual inspection only. |
110 589 03 59 00
Mounting wedge
122 589 00 28 00
Blade