Inspection data of cylinder head
Number | Designation | Engines | ||
BE01.30-N-1002-02B | Permissible variation in flatness of lower separating surface in longitudinal direction | over the entire length | mm | 0.05 |
Over a length of 150 mm | mm | 0.02 | ||
Commercially available tools
Workshop equipment
WE58.40-Z-1001-19A | Straightedge |
D01.30-0051-01
1 Use knife-edge straightedge (2) to measure flatness of cylinder head contact surface (1) over its entire length and diagonally.
If a light gap is formed
2 Inspect permissible variation with a feeler gage.
If the inspection is carried out in a transverse direction, the stated permissible variation is only a reference value and cannot be measured.