Crankcase ventilation, cylinder head cover
Number | Designation | Engine 612.961/ | Engine 612.963 | Engine 612.965 | Engine 612.990 | |
BA01.20-P-1002-01A | Bolt, trim panel of cylinder head cover to cylinder head cover | Nm | 10 | 10 | 10 | 8 |
BA01.20-P-1003-01A | Bolt, charge air distribution pipe cover to charge air manifold | Nm | 10 | 10 | 10 | - |
P01.20-2018-11
1 Remove bolts (3, 4).
Installation: Observe tightening torques.
2 Pull out trim panel (2) of charge air manifold to the side.
Installation: Introduce shackles for the cover (2) into the rubber mount (5) so that the cover (2) is not damaged.
3 Remove trim panel (1) for cylinder head cover.
Installation: Ensure correct seating of the cover (1) to make sure that no lines are pinched.
4 Install in the reverse order.
Shown on engine 612.961