Shown on engine 457.9 |
1 | Oil separator |
2 | Vent line |
3 | Seal |
4 | Seal |
W01.20-1019-12
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
Caution | Risk of injury to skin and eyes due to handling of engine oil. Risk of poisoning caused by swallowing engine oil | Wear protective gloves, protective clothing and safety glasses. | |
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
| Remove/install | ||
1 | Detach bleed line (2) from oil separator (1). | Installation: Replace seal. | |
2 | Check bleed line (2) for deposits. | If deposits are present: | |
| |||
Clean or replace bleed line (2). | |||
3 | Remove oil separator (1) from timing case. | Collect escaping engine oil in a suitable container. | |
Installation: Replace seals (3, 4) on oil separator (1). | |||
Bolt, oil separator to timing case | |||
4 | Install in the reverse order | ||
5 | Perform engine test run. | See information from body manufacturer. | |
6 | Check area around oil separator (1) in terms of leak tightness. | Visual inspection. |