1 | Cylinder head cover |
2 | Oil filler neck hose |
B01.20-0021-06
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
| Remove | ||
1 | Remove the oil filler neck hose (2) on cylinder head cover (1) | ||
2 | Check the cylinder head cover profiled gasket (1) for leak-tightness | ||
3 | Remove the cylinder head cover (1) | ||
| Clean | ||
4 | Clean the cylinder head cover (1) and the rocker arm framework, in its full length and its sealing surfaces | ||
| Install | ||
5 | Install a new profiled gasket on cylinder head cover (1) | ||
6 | Install the cylinder head cover (1) | Tightening sequence of engine cylinder head cover | |
Observe the tightening diagram of the bolts. | |||
Head cover bolt | |||
7 | Perform the engine operation test | ||
8 | Stop the engine an check the area of the cylinder head cover (1) for leak-tightness | Visual inspection |