S01.10-A001-79
1 | Engine cover | 2 | Ball heads | 3 | Elastomer bearing |
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
| Remove/install | ||
1 | Lift engine cover (1) in front area and detach from ball heads (2). | Installation: Wet elastomer bearings of engine cover (1) with lubricant. | |
Lubricant, rubber assembly 1 l | |||
2 | Pull engine cover (1) forward and out of elastomer bearings (3). | Installation: Wet elastomer bearings (3) with lubricant. | |
Lubricant, rubber assembly 1 l | |||
| Check | ||
3 | Check elastomer bearings of engine cover (1) and elastomer bearings (3) for damage. | If damage is identified, | |
| |||
Replace damaged elastomer bearing of engine cover (1) or damaged elastomer bearing (3). | |||
4 | Install in the reverse order |