1 | Elastomer bearing |
2 | Rear engine cover |
3 | Guide |
P01.10-3463-06
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Switch off ignition and store transmitter key outside of transmitter range (min. 2 m). | ||
2 | Remove upper engine cover. | ||
| |||
3 | Release elastomer bearings (1) of the rear engine cover (2) from the ball heads. | Installation: Coat the elastomer bearings (1) with lubricant. | |
Lubricant, rubber assembly 1 l | |||
4 | Tilt rear engine cover (2) toward rear and remove from guide (3). | ||
5 | Guide rear engine cover (2) out of clip (4) and remove. | Installation: Ensure that rear engine cover (2) is seated correctly on guide (3). | |
| Check | ||
6 | Check elastomer bearings (1) for damage and wear. | If damage is present: | |
| |||
replace affected elastomer bearing (1). | |||
7 | Install in the reverse order |