P01.10-3379-08
1 | Engine cover | 3 | Ball head | |
2 | Cold air guide | 4 | Elastomer bearing |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
| Remove/install | ||
1 | Release cold-air ducting (2) at cold air intake manifold. | ||
2 | Detach ball head (3) from the elastomer bearing on the air filter housing. | Installation: Coat elastomer bearing at air filter housing with antiseize paste. | |
Lubricant, rubber assembly 1 l | |||
3 | Release elastomer bearings (4) and remove engine cover (1) with cold-air ducting (2) in upward direction. | Installation: Coat elastomer bearings (4) with antiseize paste. | |
Lubricant, rubber assembly 1 l | |||
4 | Check the elastomer bearings (4) and the elastomer bearing at the air filter housing for damage, and replace them if necessary. | ||
5 | Install in the reverse order. |