P01.10-2776-06
1 Left engine cover
2 Right engine cover
3 Rubber mounts
4 Supports
5 Rubber mounts
| Remove/install | ||
1 | Open engine hood | ||
2 | Pull left engine cover (1) up and out of the rubber mounts (3) (arrows), then pull out the mounts (4) at the air filter housing and remove | Installation: Check the condition of the rubber mounts (3) and check correct seating, replace if necessary. | |
3 | Pull right engine cover (2) up and out of the rubber mounts (5) and retract from the oil dipstick guide tube | Installation: Check the condition of the rubber mounts (5) and check correct seating, replace if necessary. | |
4 | Install in the reverse order |