Removing and installing engine with removal fixture
Engine mounts, engine supports
Number
Designation
Engine 111.979
Engine 111.984
BA22.10-N-1002-01H
Engine support to front engine mount
Nm
83
83
Workshop equipment
WE58.40-Z-1020-11A
Removal fixture for engine
D01.10-1001-01
1 Move in engine removal fixture, attach stop parts to engine and raise engine slightly.
Before raising engine, set center of gravity and tighten clamping bolt (arrow).
D22.10-1004-01
D22.10-1003-01
2 Slacken engine supports (1 and 5) at both engine mounts (4 and 8), raise engine further and pull out.
Installation: Place engine slightly onto the engine mounts (4 and 8), screw in the securing bolts (2 and 6) and tighten by hand until they make contact. Then, lower engine fully and tighten securing bolts (2 and 6) to the final torque. Pay attention to tightening torque.
