P00.60-2013-09
Fig. item, etc. | Work instructions | ||
Danger! | Lethal injuries are possible if vehicle slips off of lifting platform | Align vehicle between the four lifting platform pillars and position the four support plates at the hoist mounting points specified by the vehicle manufacturer. | |
Danger! | Danger of accident through self-acting movement of the vehicle when jacked up Risk of injury through intrusion into engine compartment or driveline where rotating parts pose a serious hazard. | Make sure that the jack stands are securely positioned. Authorized person should occupy driver's seat. | |
| If the support plates are not properly mounted (012) at the vehicle's designated jacking points (1,2) damage may occur to the side sill covers (3). | ||
| The vehicle should be secured against tipping or falling off the platform when removing any units. | ||
| Lifting vehicle with inspection pit lift or garage jack | ||
Inspection pit lift. | |||
1 | Forward jacking points | ||
2 | Rear jacking points | ||
3 | Side sill covers | ||
011 | Lifting platform | ||
012 | Support plates | All four support plates must be extended to an equal distance (Dimension X). |
Workshop equipment
WE58.40-Z-1001-05A | Two-post lifting platform |
WE58.40-Z-1002-05A | Pit lift |