220 589 05 99 05
Adapter line pin 1.50 x 0.60 mm
220 589 01 99 60
MQS blade
220 589 01 99 50
Blade holder with clamping pliers
For measurements at the corresponding contact, the adapter line pin 1.50 x 0.60 mm must be used.
1 | Move retaining cap (17.1) forward in direction of arrow as far as end stop with a suitable tool. |
2 | Insert blade holder with collet and the MQS blade (17.2), as shown, under the spring shackle (17.3), lift spring shackle (17.3) and hold. |
3 | By pulling the corresponding electric line (17.4), unpin contact from connector socket (17). |
P00.19-6772-74