000 589 13 99 00
Blade holder with clamping pliers
Wiring harness repair kit, basic
New passenger vehicle wiring harness repair kit
LSK 8 blade
220 589 04 99 00
220 589 01 99 50
220 589 01 99 56
P54.18-2532-01
Unfasten secondary release on version with spring (shown on laminated sensor contact, Junior Power Timer coupling)
1 Insert a suitable tool between the spring and the housing.
2 Press out the spring.
P54.18-2572-01
Unfasten secondary release on version with slide (shown on laminated sensor contact, Junior Power Timer coupling)
3 Push (1) slider out of locked position in direction of arrow.
P54.18-2567-01
Unfasten secondary release on version with pin
4 Using a suitable tool, push pin out of last detent in direction shown by arrow.
P54.18-2533-06
Unpin female contacts from coupling
5 Insert blade holder with clamping pliers and LSK 8 blade from front side though openings at contact cavity of coupling (1).
This step compresses the spring shackles (2) on the female contact.
6 A slight tug on the corresponding cable will remove the female contact (1) from the coupling.