Use of fine polishing paste

AP98.00-S-0638S

16.01.2019

Model

415, 447, 448, 470, 471, 636, 639, 668, 670, 900, 906, 907, 910

	Application
1	Was and dry off vehicle.	Car Wash	*BR00.45-Z-1002-04A
2	Remove any other contamination such as present tar splashes and industrial deposits.	Application of paintwork care and polishing agents Model 415, 447, 448, 470, 471, 636, 639, 668, 670, 900, 906	AP98.00-S-0635S
		Application of paintwork care and polishing agentsModel 907, 910	AP98.00-D-0635TS
		 Do not perform these jobs in direct sunlight. Otherwise serious paint damage may occur.
3	Remove buffer swirls when polishing painted surfaces.	If buffer swirls are present.
	Buffing marks from polishing painted surfaces	Model 447, 448, 470, 471	AR98.00-S-0750-17E
	Buffer swirls when polishing painted surfaces	Model 415, 636, 639, 668, 670, 900, 906, 907, 910	AR98.00-S-0750-17S
		 Guide polishing machine with light pressure and do not tilt it. Otherwise buffer swirls may be caused.
		 Note information on buffer swirls when polishing painted surfaces.
		 Use cork or rubber backing discs. Take care not to rub through the top coat film. Depending on the damage type, roughen or grind affected area beforehand with wet abrasive paper (P 2000).
		Polish, silicone-free 5 l, DB supply specification 7545.00	*BR00.45-Z-1013-04A
		Gloss preservation, 500 ml, DB supply specification 7551.10	*BR00.45-Z-1014-04A
		Fine polishing paste, polish 1 l, DB supply specification 7543.00	*BR00.45-Z-1015-04A
		Paint cleaner	*BR00.45-Z-1016-04A
		Polish 500 ml	*BR00.45-Z-1036-04A
4	Buff up any visible polishing marks and the entire surface of the part.	 Use Moltopren disk without polish. Keep buffing until the luster matches that of the adjacent surfaces.
5	Remove polish residue.	 Polish residue forms a bright film after drying. Buff this up with a clean polishing wad moistened in water until the paint surface is clear.
		Polishing wad	*BR00.45-Z-1043-04A
6	Buff up the surface manually with polish and a polishing wad.	 To make the polishing process easier, change to clean polishing wads or cloths at frequent intervals.
		Polish, silicone-free 5 l, DB supply specification 7545.00	*BR00.45-Z-1013-04A
		Polishing wad	*BR00.45-Z-1043-04A
		Polishing cloth	*BR00.45-Z-1044-04A
7	Remove polish residue.	 Polish residue forms a bright film after drying. Buff this up with a clean polishing wad moistened in water until the paint surface is clear.
		Polishing wad	*BR00.45-Z-1043-04A
8	Treat paint surface with a gloss preserver.	 The gloss preservation protects the paint against premature matting.
		Gloss preservation, 500 ml, DB supply specification 7551.10	*BR00.45-Z-1014-04A

Repair materials

Number	Designation	Order number
BR00.45-Z-1002-04A	Car Wash	A 001 986 41 71 09
BR00.45-Z-1013-04A	Polish, silicone-free 5 l, DB supply specification 7545.00	A 000 986 45 74
BR00.45-Z-1014-04A	Gloss preservation, 500 ml, DB supply specification 7551.10	A 000 986 44 74
BR00.45-Z-1015-04A	Fine polishing paste, polish 1 l, DB supply specification 7543.00	A 000 986 43 74
BR00.45-Z-1016-04A	Paint cleaner	A 001 986 37 71
BR00.45-Z-1036-04A	Polish 500 ml	A 000 986 46 74
BR00.45-Z-1043-04A	Polishing wad	A 000 986 02 62
BR00.45-Z-1044-04A	Polishing cloth	A 000 986 04 62

เอกสารที่อ้างถึง