ap9140s9150cv

Check seat belts and buckles for external damage and correct operation

ประเภท ap · หัวข้อ 91.40 · เวอร์ชัน 0105 · 2017-07-11

ใช้กับ: Model 415

ไม่มีใน “th” แสดงเป็น อังกฤษ

ตำแหน่ง

กลุ่มฟังก์ชัน 3 Body › 91 Seats, bunks, restraint systems › 91.40 Seat belts, emergency tensioning retractors — ซีรีส์ 415

EinPAS 27 Passive safety/restraint systems › 27.17 Restraint system › 27.17.20 Seat belt/seat belt buckle/seat belt tensioner — ซีรีส์ 415

AP91.40-S-9150CV

Check seat belts and buckles for external damage and correct operation

11.07.2017

Model

415

Check seat belts and buckles for external damage and correct operation

S91.40-4567-09

1

Belt

5

Housing

2

Seat belt buckle tongue

6

Seat belt buckle fastening

Check seat belts and buckles for external damage and correct operation

3

Buckle latch guide

4

Release button

5

Housing

S91.40-4568-01

Check

Warning

Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units.

Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply.

AS91.00-Z-0001-01A

1

Pull out belt strap (1) completely, and check for severed fibers, chafe marks or other damage

The seat belt and/or seat belt buckle must always be replaced if damaged, not functioning correctly or defective. If a customer refuses replacement of a damaged seat belt, an appropriate endorsement must be made on the repair order.

If damage is present:

Subject to a separate repair order, replace the belt strap.

2

Inspect seat belt (1) for twisting

If the belt strap is twisted:

Subject to a separate repair order, remove any twisting in the belt strap.

3

Check locking function of inertia reel

Check locking function of inertia reel by jerking the belt (1).

In the event of a malfunction in the inertia reel:

Subject to separate repair order, replace seat belt

4

Check seat belt buckle lock and that belt tab (2) engages correctly by tugging on belt tab (2)

By tugging on the belt tab (2).

In the event of a malfunction in the lock:

Subject to a separate repair order, replace the seat belt buckle.

5

Check seat belt buckle for signs of damage

A loose housing (5), a protruding red release button (4) and a latch plate guide (3) flush with the upper edge of the housing are further indications that the seat belt buckle has been damaged.

In the event of damage or defects:

Subject to a separate repair order, replace the seat belt buckle.

6

Check condition of seat belt buckle fastening (6) and look for signs of external damage

Watch out for broken wires and deformations. Chafe marks on the seat lining are also indications of damaged seat belt buckle fastenings (6).

If attachments are loose or the seat belt buckle attachment is damaged:

Subject to a separate repair order, replace the seat belt buckle.

เอกสารที่อ้างถึง