AP83.00-T-8381BB | Replace dust filter for heating/air conditioning | 3.7.02 |
MODELS 613.355 /358 /388 /455 /485 with CODE (HA4) Konvekta air conditioning with roof heater and timer
T83.00-0033-12
1 Heat exchanger
2 Water filter
3 Wires
4 Heating pipes
| Remove | ||
Danger! | Risk of injury from cuts and grazes on sharp-edged vehicle components | When working on or in area of sharp vehicle parts with burrs always wear protective gloves. Deburr repair panels. | |
1 | Remove air conditioning cover | The accident prevention regulations should be observed when working in the roof area | |
| |||
2 | Remove air conditioning air ducts | ||
| |||
3 | Detach water filter (2) from heat exchanger (1) | The water filter (2) is connected to the heat exchanger (1) by wires (3). | |
4 | Remove water filter (2) | When the water filter (2) is not damaged, it can be washed out with water and cleaned with compressed air. | |
| Install | ||
5 | Attach water filter (2) to the heat exchanger (1) | Do not damage the heating pipes (4) of the heat exchanger (1) when reinstalling the water filter (2). | |
Thin tie straps can also be used instead of wires (3). | |||
6 | Install air conditioning air ducts | ||
| |||
7 | Install air conditioning cover | ||
|