AP83.00-T-8381BAS | Replace heating/ventilation dust filter | 20.2.03 |
MODEL NMB613.358 /388 with CODE (HKD) Konvekta ACX 640 air conditioning with roof heater
MODEL NMB613.455 with CODE (HKE) Konvekta ACX 642 air conditioning with roof heater
MODEL NMB613.455 with CODE (HKB) Konvekta ACX 641 SAPTCO air conditioning without roof heater
Shown on model 613.455 with Konvekta ACX 641 SAPTCO air conditioning without roof heater code HKB
1 Dust filter
2 Bracket
3 Evaporator
T83.00-0057-03
| Remove/Install | ||
Danger! | Risk of death caused by falling from vehicle roof. Risk of injury to other persons caused by falling objects during work in roof area. | ||
Danger! | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels. | |
1 | Remove cover of air conditioning system with roof equipment | Only on model 613.455 with Konvekta Only remove the rear cover. | |
| Remove/install the air conditioning cover (roof equipment) | ||
2 | Fold up paneling of evaporator unit | ||
| Remove/install evaporator unit paneling | Model 613.455 with Konvekta | |
| Remove/install evaporator unit paneling | Model 613.358/388 with Konvekta ACX 640 air conditioning with roof heater code HKD, | |
3 | Remove air conditioning air ducts | ||
| Remove/install the air duct for the air conditioning (roof equipment) | ||
4 | Remove bracket (2) above evaporator (3) | Only on model 613.455 with Konvekta | |
5 | Detach wires on dust filter (1) | Model 613.358/388 with Konvekta ACX 640 air conditioning with roof heater code HKD, | |
Installation: Thin cable ties can also be used instead of wires. | |||
6 | Remove dust filter (1). | Wash out undamaged dust filters (1) with water and clean with compressed air, replace if necessary. | |
7 | Install in the reverse order |