AP83.00-T-8381BAF | Replace heating/ventilation dust filter | 25.1.05 |
MODEL NMB613.358 /388
(Webasto front box version)
T83.00-0089-01
1 Frame
2 Bolt
1 Frame
3 Dust filter
T83.00-0090-01
| Remove/Install | ||
Danger! | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels. | |
1 | Open front flap | See Operator's Manual | |
2 | Turn the screws (2) through 90° and detach the frame (1) from the heater housing | Pull the frame (1) downwards (arrow A) and then detach. | |
3 | Force frame (1) apart (arrow B) using suitable tool and remove dust filter (3) | Only force the frame (1) apart (arrow B) far enough that the dust filter (3) can be removed, otherwise the frame (1) can be damaged. | |
The dust filter (3) can be washed out with water and cleaned with compressed air if it is not damaged. | |||
4 | Install in the reverse order |